Home Products | Download | FAQ | Partnership | Contact Us   
 



Basic IAD

 
picture
data sheet
product manual
driver
INTRODUCTION

The JAD101S CPE IAD solution provides VoIP and full Ethernet bridge and router functionality and proven ADSL/ADSL2/ADSL2plus performance and combines an
“Always-on” high speed connection to the telephone line and Ethernet connection to a host PC or Ethernet hub into a single cost-effective solution. JAD101S IAD Router with full compliance to T1.413 i2, G.992.1, G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), and G.992.5 (ADSL2plus), and support for Annexes A, B and M for DSL. SIP voice protocol standard.

 

 

Voice features
● Support for SIP protocols
● Telephony functions (call waiting, call hold, call forward)
● Echo cancellation (G.168) – configuable
● Silence suppression (Voice Activity Detection (VAD) and Comfort Noise
   Generation (CNG))
● FAX - T.38 relay and G.711 pass through
ADSL2+ features
● DMT: T1.413, G.992.1, G.992.2, G.992.3, G.992.5 with auto-detection
● Supports PPP encapsulation over ATM (PPPoA) and PPP over Ethernet 
   (PPPoE)
● Supports RFC1483 Route and RFC1483 Bridge
● Point-to-Point Protocol (PPP)
-- PPP over ATM (only single-link PPP per VC)
-- PPP over Ethernet encapsulation over the virtual interface (per RFC 2516)
-- PAP or CHAP for user authentication
Network Management
● Web-based Graphical User Interface (GUI) enabling end-user device
   configuration Via HTTP
● CD-ROM easy setup program
Security Firewall
● Stateful packet inspection (SPI)
● NAT/NAPT
● DMZ
● DOS
● Common types of Attacks
● MAC and IP level packet filtering
LAN Protocols / Ethernet Interfaces
● Support 1 Port Ethernet Interface (10/100Mbps) which compliant with IEEE
   802.3x standards.
● 10/100 Mbps auto selection
● Ethernet port supports Automatic MDI/MDI-X configuration transceiver.
Hardware interface
● 1 Power jack
● 1 Reset button for reset to factory default function
● 1 Ethernet jack for LAN port connection
● 1 RJ11 phone jack for ADSL connection
● 1 RJ11 phone jack for VOIP FXS 1 port connection
Environment
● Operating Temperature: 0℃~40℃
● Storage Temperature: 0℃~60℃
● Operating Humidity: 10%~85% RH
● Storage Humidity: 10%~90% RH
Dimension :132X90X30mm

ORDERING INFORMATION

JAD101S Basic IAD

 

 
Copyright © 2008 Justec International Technology Inc. All Rights Reserved.  Home Products | Download | FAQ | Partnership | Contact Us